PRODUCT DESCRIPTION
Chroma-Q Studio Force V Phosphor 12 w/ trnnion, 3ft TRUE1 to Male Edison Tail
The Chroma-Q Studio Force V Phosphor 12 w/ trnnion, 3ft TRUE1 to Male Edison Tail is a 3,200 - 5,600K CCT, variable white fixture which utilises innovative LED technologies found in the Studio Force™ range to provide an equivalent soft edge output to a fluorescent fixture - up to 4,200 lumens - developed specifically for use in TV, film and broadcast studio environments. Other features include fine-tuning of the green & magenta tints and frequency for camera, an extremely smooth uniform wash, extra soft beam, theatrical grade dimming and laboratory calibration to match Black Body Locus. Designed for practicality, the unit is equipped with a manual control mode, colour touch screen interface, fanless, studio& full modes for maximum control of the units and a range of optional accessories.
Key Features
- 3,200 - 5,600K CCT variable white
- Variable frequency
- Extreme output – up to 4,200 lumens
- Extra soft beam – very wide output
- Extremely smooth, uniform wash
- Theatrical grade dimming
- Ideal for film and studio applications
- Factory calibrated to match Black Body Locus
- 335mm / 13.2in length ideal for floor, wall or truss mounting
- Camera friendly
- PowerCon input and output for easy daisy chaining of fixtures
- Broad range of accessories available, including barn door and spigot adaptor
- Fanless, studio & full control modes
- Intuitive colour touch screen interface
- Flat end plates for seamless wall-washing
- Built-in power supply
- Hidden quick release fixings
- Rugged extruded aluminium body
- Also available as a DC battery-powered version
Technical Specifications
- Product Code: CHSFVP12
- Dimensions: 335mm x 190mm x 218mm / 13.2in x 7.5in x 8.6in
- Weight: 4kgs / 9lbs
- Shipping Dimensions: 432mm x 343mm x 279mm / 17in x 13.5in x 11in
- Shipping Weight: 6kgs / 13lbs
- Power Supply: Built-in
- Power Input Rating: 100-240V AC, 50-60 Hz, 160VA
- Power Factor: 0.998
- Power Consumption: 150W
- Typical Power & Current: Measurements done with all LEDs at maximum intensity. Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
- Power Connector In/Out: PowerCon
- Data Connectors In/Out: XLR 5-pin
- Control Protocol: ANSI E1.11 USITT DMX 512-A
- Cooling System: Forced - 1 fan
- Operating Temperature: 0°C to 40°C
- Construction: Anodised aluminium extrusion
- Colour: Black
- Built-In Hardware: Quick release lever for tilt adjustment
- IP Rating: IP20
- Approvals: CISPR 22/EN55022 & CISPR 24/EN55024, ICES- 003 :2004 & FCC Part 15 Subpart B: 2007, CSA C22. No.166-M1983:R2008 UL 1573:2010; UL 8750:2009
Control & Photometric Data
- LED Engines: 2
- LEDs Per Engine: 30 (6 x RGA; 12 x B)
- Total LEDs: 60
- Control Modes: 3 channel KHL, 4 channel RGWA, 1 channel Look Sel, Manual/Mstr, Slave, Look Store
- Dimming Curve: Theatrical
- Variable Effects Engine: N/A
- Effects Parameters: N/A
- Hot Lumen Output (Combined): 4,202 @ 5600K; 1,751 @ 3200K
- Optics: Remote phosphor panel
- Beam Angle: Softlight
- Beam Distribution: Symmetrical direct illumination
- CCT: 3200K - 5600K (+/- 200K)
- Colour Gamut: Performance enhanced
- CRI: Up to 91
- Lamp Life: L70 at 50,000 hours
